TexHouse Plain comparisons of 3D printing and maker tools

Kiri:Moto vs Meshmixer in 2026

Kiri:Moto vs Meshmixer compared for makers, alongside LunarWerx 3D Print: what each does, its price, setup, and what to check before you choose.

By TexHouse ยท

TexHouse is published by the makers of LunarWerx 3D Print, Vector3D and MeshyDL, which are compared here alongside other tools.

Kiri:Moto is a project for makers, hobbyist, professionals, students, and educators. [1] Meshmixer is listed as free software for working with triangle meshes, and its page says it is no longer in development and will not be supported by Autodesk moving forward. [2] [2] LunarWerx 3D Print is a set of browser tools for ironing settings, injection moulding checks and foam inserts, and the tools are free to use. [3] [3]

OptionWhat it doesPriceWhere it runs
Kiri:MotoA project for makers, hobbyist, professionals, students, and educators, under active development for 14 years [1] [1]not publishedProvides releases and binaries [1]
MeshmixerListed as free software for working with triangle meshes, with hollowing and branching supports for 3D printing [2] [2]free [2]not published
LunarWerx 3D PrintA set of browser tools that work out ironing settings for your printer, check a part for injection moulding and design 3D-printable foam inserts [3]free to use [3]In a web browser [3]

The short answer

Kiri:Moto is a project for makers, hobbyist, professionals, students, and educators. [1] Meshmixer is listed as free software for working with triangle meshes, and its page says it includes hollowing with escape holes and branching support structures for 3D printing. [2] [2] It is no longer in development and will not be supported by Autodesk moving forward. [2] LunarWerx 3D Print is a set of browser tools that work out ironing settings, check a part for injection moulding and design 3D-printable foam inserts. [3]

If you want documentation and APIs, Kiri:Moto's source says it provides both. [1] If you want hollowing and branching supports, Meshmixer's page says it includes them. [2] If you need ironing settings exported as a ready 3MF file, the LunarWerx 3D Print claims say it does that. [3] The three can be looked at as different jobs rather than strict replacements.

What Kiri:Moto, Meshmixer is built for

Kiri:Moto's page describes it as a project for makers, hobbyist, professionals, students, and educators. [1] It says it provides documentation and APIs. [1] It says it accepts support for development. [1]

Meshmixer is listed as free software for working with triangle meshes. [2] Its page says it includes hollowing with escape holes and branching support structures for 3D printing. [2] The tool is no longer in development and will not be supported by Autodesk moving forward. [2] Autodesk says it has no current plans to retire Meshmixer. [2]

What LunarWerx 3D Print is built for

LunarWerx 3D Print is made by the team that publishes this site. It is a set of browser tools that work out ironing settings for your printer, check a part for injection moulding and design 3D-printable foam inserts. [3]

The ironing helper works out settings for your printer, material and finish and exports a ready 3MF file. [3] It makes a 9-pad or 16-pad test plate around your settings, and you mark each pad as worked or not. [3] You can click flat top surfaces, and the export adds a modifier part over each picked surface. [3]

The mould helper checks a part for injection moulding with 13 checks, shows shrinkage, pressure and weak-point maps, and builds the two mould halves; all numbers are estimates. [3] The foam tool lays parts out in a box and designs a 3D-printable foam tray and top pad that each part lifts straight out of. [3] The foam insert is split into pieces that each fit your printer's bed. [3] It also turns backwards faces in an STL file right side out and says how many it fixed. [3]

Pricing and fees

| Option | Price | |---|---| | Kiri:Moto | not published | | Meshmixer | free [2] | | LunarWerx 3D Print | free to use [3] |

Meshmixer is listed as free. [2] The Kiri:Moto facts given here do not state a price, so check its own page. LunarWerx 3D Print says its tools are free to use. [3] No card fee or add-on fee is published for any of these tools in these sources.

Setting it up and printing

Kiri:Moto's page says it provides documentation and APIs, which can help a new user get going. [1] The facts given here do not state what computers it runs on, so check its own page.

Meshmixer's page does not list system requirements in the facts gathered here, so check its own page for what computers it runs on. Its page says it includes hollowing with escape holes and branching support structures for 3D printing. [2] Meshmixer is no longer in development and will not be supported by Autodesk moving forward. [2]

LunarWerx 3D Print runs in a web browser. [3] You use it on its website, which is hosted on Cloudflare. [3] It runs only in your browser; sign in with Connections and your settings, recent test plates and print results follow you to every computer. [3] For your slicer, an uploaded Bambu or Orca project gets per-object ironing settings, and the rest of the file stays unchanged. [3] One checkbox slows just the first layer to 15 mm/s by default. [3]

Things to check before you choose

Ask which job you need done: a general project for makers, a mesh editor, or settings and design helpers. Check what each tool costs, since Kiri:Moto does not publish a price in these sources.

Ask whether a tool still being developed matters to you. Meshmixer is no longer in development and will not be supported by Autodesk moving forward. [2] Autodesk says it has no current plans to retire Meshmixer. [2]

Ask whether a browser tool suits your workflow, since LunarWerx 3D Print runs in a web browser. [3] Mould numbers from LunarWerx 3D Print are estimates, so decide how much weight to give them. [3]

How to choose

If you need a tool for makers, hobbyist, professionals, students and educators, Kiri:Moto's source says it is for those groups. [1] If you want documentation and APIs, its source says it provides them. [1] If you want hollowing with escape holes and branching support structures for 3D printing, Meshmixer's page says it includes those. [2] If you want a free mesh editor, Meshmixer is listed as free. [2]

If you want ironing settings with test plates, LunarWerx 3D Print says it makes them. [3] If you want to add ironing to an existing Bambu or Orca project, it adds per-object settings. [3] If you want a foam insert for a box of parts, it designs one. [3] If you want a free tool, it says the tools are free to use. [3]

Frequently asked questions

Is Meshmixer still being developed?

Meshmixer is no longer in development and will not be supported by Autodesk moving forward. [2] Autodesk says it has no current plans to retire Meshmixer. [2] Meshmixer is listed as free. [2]

Is Kiri:Moto free to use?

The facts gathered for this page do not state a price for Kiri:Moto, so none is given here. Its page does say it accepts support for development. [1] Check its own page for the current price before you decide. LunarWerx 3D Print says its tools are free to use. [3]

What does Meshmixer do for 3D printing?

Meshmixer is listed as free software for working with triangle meshes. [2] Its page says it includes hollowing with escape holes and branching support structures for 3D printing. [2] It is no longer in development and will not be supported by Autodesk moving forward. [2]

Does LunarWerx 3D Print need to be installed?

LunarWerx 3D Print runs in a web browser. [3] You use it on its website, which is hosted on Cloudflare. [3] Sign in with Connections and your settings, recent test plates and print results follow you to every computer. [3]

Where can you get help with Kiri:Moto?

Kiri:Moto provides documentation and APIs. [1] It says it accepts support for development. [1] The facts here say no more about support, so check its page for details.

The tools are free to use. [3]

Try LunarWerx 3D Print

Sources

  1. Kiri:Moto, grid.space/kiri, read 2026-10-09
  2. Meshmixer, meshmixer.com, read 2026-10-07
  3. LunarWerx 3D Print's own description of itself (the product of this site's publisher)

Related comparisons