--- {"title": "How to print a first layer without glue", "description": "Learn how Bambu Lab owners can print a first layer without glue by preparing the plate, settings, and tools.", "url": "https://texhouse.us/how-to-print-a-first-layer-without-glue-for-bambu-lab-owners/", "date": "2026-10-09"} --- Learn how Bambu Lab owners can print a first layer without glue by preparing the plate, settings, and tools. A first layer without glue starts with a clean plate, the right print settings, and a careful first layer check. Check the plate surface, print settings, and material choice before starting so the first layer has the conditions needed to attach. | Option | What it can do | | |---|---|---| | Clean plate and printer settings | Use the plate and print settings already available to prepare a first layer. | Check the plate and settings before each print. | | LunarWerx 3D Print | One checkbox slows just the first layer to 15 mm/s by default; LunarWerx 3D Print says it then sticks to a clean plate without glue. [^1] | Runs in a web browser. [^2] | ## What you need before you start Before printing without glue, have a clean build plate ready and remove anything that could stop the first layer from touching the surface properly. Check that the printer is ready to print and that the material settings match the material being used. Keep the model file, the printer settings, and any tools for checking the first layer available before starting. A first layer that sticks well usually depends on the plate condition, the material choice, and the settings used for the print. Have time available to watch the first layer begin so changes can be made if the result does not look right. ## Step by step 1. Start with a clean build plate. Remove dust, fingerprints, and leftover material from the surface before beginning the print. 2. Load the print and check the settings for the material and printer. Confirm that the first layer settings are suitable for printing on a clean plate without glue. 3. Begin the print and watch the first layer. Look for a layer that stays attached to the plate and forms the shape expected from the model. 4. If the first layer does not stay attached, stop and check the basics before trying again. Clean the plate, review the settings, and check that the material choice matches the print. 5. Keep notes about changes that help. Recording what changed can make future prints easier to adjust without using glue. 6. Repeat the process until the first layer works with the chosen setup. A repeatable process helps Bambu Lab owners understand how the plate, material, and settings affect the result. A clean plate and careful checks can help reveal whether the issue comes from the surface, the settings, or another part of the printing process. ## Tools that can do it Several types of tools can help with a first layer without glue. Manual checks using a clean plate and printer settings can be enough for some prints. Some makers may choose software tools that help prepare settings or files for specific printing tasks. LunarWerx 3D Print is made by the team that publishes this site. LunarWerx 3D Print runs in a web browser. [^2] One checkbox slows just the first layer to 15 mm/s by default; LunarWerx 3D Print says it then sticks to a clean plate without glue. [^1] The tools are free to use. [^3] You open them in a web browser. [^2] It makes a 9-pad or 16-pad test plate around your settings, and you mark each pad as worked or not. [^4] Other choices include using the printer software settings directly or using another tool that helps with print preparation. Check what each option does before choosing a workflow for a specific first layer problem. ## Common mistakes to avoid A common mistake is adding glue before checking whether the plate is clean. A dirty surface can make it harder to understand what caused a first layer problem. Another mistake is changing several settings at once, because it becomes harder to know which change helped. Avoid starting a print and walking away before the first layer is visible, since early problems are easier to spot at the beginning. Check the material, plate condition, and settings together instead of focusing on only one part of the process. Keep a simple record of successful settings so the same approach can be used again. ## Frequently asked questions ### How to print a first layer without glue on a Bambu Lab printer? Start with a clean plate and review the print settings before starting the job. Watch the first layer as it begins and adjust the setup if it does not stay attached. The aim is to find a repeatable combination of plate condition, material, and settings instead of relying on glue. ### Can a Bambu Lab owner print without using glue? Yes, a Bambu Lab owner can try printing without glue by preparing a clean plate and checking the first layer process. Results depend on the material, the surface, and the settings used for the print. A careful first layer check helps show whether the setup is working. ### What should be checked before printing a first layer without glue? Check that the build plate is clean, the material settings match the material, and the printer is ready for the job. Watching the first layer helps identify problems early. Changing one thing at a time can make it easier to understand what improves the result. ### Does LunarWerx 3D Print help with a first layer without glue? One checkbox slows just the first layer to 15 mm/s by default; LunarWerx 3D Print says it then sticks to a clean plate without glue. [^1] It also runs in a web browser. [^2] ### What mistakes can stop a first layer from sticking without glue? Common issues include printing on a surface that needs cleaning, changing too many settings at once, or not watching the first layer start. Checking the surface, material, and settings together gives a clearer way to find the cause of a first layer problem. The tools are free to use. [^3] - [Visit LunarWerx 3D Print](/go/how-to-print-a-first-layer-without-glue-for-bambu-lab-owners) ## Sources [^1]: LunarWerx 3D Print's own description of itself (the product of this site's publisher) [^2]: LunarWerx 3D Print's own description of itself (the product of this site's publisher) [^3]: LunarWerx 3D Print's own description of itself (the product of this site's publisher) [^4]: LunarWerx 3D Print's own description of itself (the product of this site's publisher)